IKEA Malm hack: how to upcycle a Malm bedside table
Want to give your space a fresh look without much investment? Upcycling your furniture is one of the most affordable and effective ways to do just. Not only can it save you the expense of having to get new furniture, you’ll have a refreshed piece that’s totally unique. And it’s great for the environment.
Not a DIY expert? No worries, once you’ve revived one piece, you’ll quickly realise that you don’t need to be a pro to upcycle with impact.
We’re lucky to have so many creative members who inspire us in our very own Lick community. @anotherfknflat from our community even gave us a full breakdown of the steps they took to do an IKEA Malm bedside table hack. Learn more about the steps they took to upcycle their bedside table and get inspired by this IKEA malm hack.
What you’ll need to upcycle your bedside table
First, get all your tools ready:
IKEA Malm hack: DIY steps
Follow the DIY steps that @anotherfknflat took:
- Start with sanding. Remove drawers and lightly sand down the surfaces/drawer edges using light sandpaper.
- Get rid of any dust. Wipe down with a dry cloth to remove any dust from the sandpaper.
- Prepare with primer. Using a white multi-surface primer, paint the whole unit on the sections which will be visible. You can paint the inside as well if you wish, but it’s not necessary.
- Wait for the primer to dry. Check primer to see how long the drying process is (we waited 2 hours before applying paint).
- Start getting that colour on. Using your Lick paint colour of choice and a small paint roller, paint your first coat all over the entire unit.
- Let it dry before the second coat. Wait until dry and then apply another coat of paint.
- Measure and cut the stripwood. Starting with the drawer fronts, measure the width and cut down x2 stripwood into the given length. Keep in mind that the drawer front is a different size to the top of the unit.
- Optional step: you can either keep the wood as is or dye the wood to a different tone. If you do choose to dye the wood, dab a cloth with the dye each time, rub it into the wood and leave to dry (we gave them two coats).
- Stick the wood panels on. Using wood glue, draw a line across the back of each wood panel and place into position. Hold into place with a bit of force for around 20 seconds to make sure they’re firmly attached.
- Repeat the last 3 steps for the top of the unit. And et voila, you’ve got your very own upcycled Ikea Malm unit.
You can use these same steps for any size unit and any size stripwood. Just keep in mind how much stripwood you may need and make sure the stripwood isn't too big/heavy for the wood glue to hold without using nails.
Not quite ready to end your upcycling journey? Check out our blog posts on how to upcycle your chest of drawers using Lick paint and how to upcycle bathroom cabinets with leftover paint
Feeling creative? Read our tips of what to do with leftover paint.